Xtreme Bullets Reloading Data 147 Gr 9mm 1911forum
Looking at the alliant online loading data, they show a max load of bullseye at 3.5 grains for a 158 grain swaged lead semi wadcutter bullet. I'm relatively new at this, having loaded about 6,000 rounds so far on my 650. Lswc, with an over all length of 1.225.
Looking for load data for Xtreme bullets!
This is the best response i've got on loading xtreme 165 grain 9mm rn bullets to max pressure and velocity. That data fits right in with what will2. I've read keep it around or just under 5 gr and it will be fine.
I have some xtreme 124 gr rn and can't find load data from hodgdon.
Any one try the loads in their pdf manual? Plated bullet data is hard to come by, so looks like xtreme did their own. I want to keep the load around/under 1,600 fps. The powders i have on hand are;
I load extreme 124gr bullets and i follow the hodgdon reloading advice which is to use lead bullet loads for plated bullets. I'm having a hard time finding data for 9mm reloads using xtreme plated 115 gr bullets and hp38 powder. Seems like some really basic load data, but it is nice they provide something to load their. Downloaded it from their website.
9mm Xtreme 147gr + Titegroup Suggested Load Data r/reloading
Any one load 147 extreme bullets, 9mm hp.
I'm conducting an experiment and it would be helpful to have a. Has anyone out there had any experience. I use 4.0gr of titegroup which chrono's at 1100 fps. We recommend keeping velocities to less than 1500 fps (feet per second).
I cant find any data for these bullets and i bought 1000 only because they were available and not much else out there. 7 with 1 in 18.5 twist. Except for one load of. Incorrect load data can lead to dangerous over.
Looking for load data for Xtreme bullets!
This data specifies the precise amounts of powder, primers, and other components needed for a given cartridge and bullet weight.
This data has been developed over the last 10+ years for the best performing loads.
.40 CAL 165gr Xtreme plated bullets load data 1911Forum
